Get control of your consumption
Energy is one of the heaviest items in the house, and it's hard to manage because it's hard to see. Energy Overview gives you the numbers as they happen: what's being used, where it's being used, and when.
Electricity, water, heating and gas are collected in one picture. The main meters are automatically retrieved from the supply, and wireless sub-meters divide the consumption between the hall, the pool, the changing room or the ventilation.
Every week the figures are ready, compared to the week before and the same week last year. Any deviation is therefore visible immediately, and you can correct it while it is still small.
“Optimize energy consumption with an overview”
From measurement to action
Get started without installing anything – The consumption on the main meters is retrieved via API from the supply, i.e. the same official measurement data that is used for billing. It requires no installation, and it covers all your addresses at once. It is enough to find the patterns: the night that never goes to zero, the weekend that looks like a weekday, one hall that is twice as high as the other.
Split consumption where it matters – Wireless sub-meters are installed in the hall, pool, ventilation, changing rooms, kitchen or lighting on the outdoor courts. Then the main meter's single number becomes several, and it becomes possible to see what is actually using the energy, and whether a replacement or a changed control gave what it was supposed to.
React while it's happening – For each meter, a normal level and a limit value are entered. If it is exceeded, a message is sent via SMS, or it can be viewed in OakSystem. The secondary meters measure in real time, while data from the supply is typically delayed by a day or two. This is how you find a running tap, a pump that won't stop, or a heating system that was turned up on a cold week in January and never turned back on.
With energy overview you can:
- Track electricity, water, heating and gas in one picture, for one house or for multiple systems at once
- Divide consumption between hall, pool, ventilation, changing room, kitchen or outdoor lighting
- Get notified when consumption deviates from normal
- Document the effect of an investment, measured before and after
- Deduce consumption and CO2 as a report to the board, municipality and grant providers
- Retrieve data from building management systems and other systems via API
You decide how much you do yourself. A large part of the meters and sensors do not require authorization, and they can be installed by the house's own technicians. Electricity meters are located in the switchboard, and this work requires authorization, so it is carried out by the house's own electrician or by us. KM Telecom can deliver the whole thing together with advice, setup and integration, and we are available along the way if you would rather be responsible for the installation yourself.
It pays off in three places
Economy – Houses where consumption is monitored and acted upon typically save 8 to 12% on energy, with the majority coming from consumption outside opening hours. When consumption is divided into hall, pool, changing room and ventilation, an investment can also be measured before and after, so that the next decision is based on a number and not on an estimate.
Drift – A deviation becomes visible while it is small: the pump that doesn't stop, the tap that runs, the heating that was turned up on a cold week and never turned back on. It is the type of error that is otherwise only discovered on an annual statement, and which by then has cost months.
Common ground – The technician needs the consumption hour by hour. The manager and the board need the month, year and development. These are the same measurements, shown in the level of detail each role needs, so a discussion about the budget is about what needs to be done, and not about whose numbers apply.
Would you like to hear how it fits your house?
Contact us for a no-obligation meeting.


Frequently asked questions about Energy Overview (FAQ)
How do the consumption figures come in?
The consumption on the main meters is automatically retrieved from the supply, i.e. the same official measurement data that is used for billing. It requires no installation and covers all your addresses at once. If the consumption is to be divided into individual halls or facilities, we install wireless sub-meters in the areas you want to look at more closely.
What do submeters provide in addition to the main meter?
That the main meter's one number becomes several. Consumption can be divided between the hall, the pool, the changing rooms, the ventilation, the kitchen or the lighting on the outdoor courts. Only then does it become visible where the energy is used, and only then can it be determined whether a replacement or a changed setting has had the effect it was supposed to have.
What can we expect to save?
A meter does not save anything in itself. Experience has shown that houses where consumption is monitored and acted upon are 8 to 12% lower, and the majority comes from consumption outside opening hours. The investment typically pays for itself over 1 to 3 years, depending on the starting point, and how much you can get from it can only be said when the first months of measurements are in.
Can we be notified when consumption is abnormal?
Yes, but it depends on where the number comes from. Measurements from the energy hub are typically one to two days delayed, so they are good for finding patterns, but not for intervening. The secondary meters on LoRaWAN measure immediately, and you can react while it is happening. For each meter, a normal level and a limit value are entered, and if it is exceeded, a message is sent by SMS, or it can be viewed in OakSystem.
About us
KM Telecom is a family-owned company with over 20 years of expertise in data networks, mobile coverage and telecom solutions for businesses – always with the customer's needs and long-term solutions at the center.
This is how we think
We make the complex simple. Our approach is technically strong, solution-oriented and founded on a desire to deliver a stable and future-proof infrastructure – every time.
Company culture
We believe in old virtues in a modern industry: working hard, keeping promises, and being trustworthy. Our culture is built on professional pride, collaboration, and respect – both internally and towards our customers.